DIGITALWORLD UPDATE /SOFTCAM /ALL MODELS

[xtrabil]

hi everybody...
i'm newby,can somebody help me? what channel on D+?and in which satellite this package available?

[gmaksim]

I already said to you that even with firmware 30th April, the TPS channels haven't worked.

Tps are working very well since the 30th April, try to find the 30th April patch instead of the 22.05 laugh1

[sansmire]

I already said to you that even with firmware 30th April, the TPS channels haven't worked.

they are not working on your box, it must have something wrong, did you try the reset factory? I can assure you 100% that the tps are working...just keep trying

[sansmire]

hi everybody...
i'm newby,can somebody help me? what channel on D+?and in which satellite this package available?
D+=taquilla, it's on astra 19.2 satellite.

[gmaksim]

I will keep trying, anyway are any porn channels on TPS?

[sansmire]

I will keep trying, anyway are any porn channels on TPS?

I wouldn't answer your silly question.
Shame on you! don't you think that this forum could be read by kids? at least , you could have sent a pm...

[popis_1]

Latest D+ : 28-05-2007

4E 5D C9 79 05 76 3E 0B
E5 2F 70 2A 05 D2 F3 27

[irankk]

any chance c.n and terner classic in dw

[irankk]

any chance c.n and terner classic in dw

[popis_1]

Latest D+ : 29-05-2007

16 57 42 0C D9 1E 4B A7
F8 AB 2A 63 F6 FE B9 B4

[xtrabil]

thanks sansmire.
bytheway, what pakckage on hotbird? as long as i know only TPS available.

[davidwatson]

anyone got any new codes for astra,501 or on that line please

[sansmire]

thanks sansmire.
bytheway, what pakckage on hotbird? as long as i know only TPS available.

That's it

[xtrabil]

TPS down since today morning. any new key for TPS or i must wait until new firmwire release?

[gmaksim]

TPS key?

[gmaksim]

What is the problem with TPS channels?

[xtrabil]

What is the problem with TPS channels?

my receiver is sft6000 with S/W 6.61, yesterday morning untill now tps close, i do as usual, go to france4, waiting until active, done, but still showing black screen. :(

[sansmire]

There are no tipis on digitalworld boxes at the moment.
Just be patient and wait for a new patch... :)

[popis_1]

Latest D+ : 02-06-2007

E0 8F 36 F2 BC 18 F4 15
0F 62 1A 9B E1 6E 0C 5D

[sansmire]

Good news! New patches for almost all digital allworld are available on :

http://www.allstb2000.net/

Enjoy it!

P.S: Let us know how tipis work after updating your receiver.

[ERO18]

Good news! New patches for almost all digital allworld are available on :

http://www.allstb2000.net/

Enjoy it!

P.S: Let us know how tipis work after updating your receiver.

Does anyone know if Premiere is working with the new patches?

[dzabcic]

TPS is working fine after patch!!! (SFT-1010E)!!! Thank youlaugh1
Premiere still down.
I hope that somebody who knows how to fix Premiere will do something about it soon. I think that majority of DW owners ply the same.
Thank you ones again!!!:)

[ERO18]

TPS is working fine after patch!!! (SFT-1010E)!!! Thank youlaugh1
Premiere still down.
I hope that somebody who knows how to fix Premiere will do something about it soon. I think that majority of DW owners ply the same.
Thank you ones again!!!:)

Thanks for the info, mate. Appreciate it. Guess we'll have to wait for Premiere.

[xtrabil]

Good news! New patches for almost all digital allworld are available on :

http://www.allstb2000.net/

Enjoy it!

P.S: Let us know how tipis work after updating your receiver.



for almost all digital allworld, except my sft6000. spee1

[dayu_nyor]

How about for SFT2000M any new firmware

[harajuku111]

Hi everybody, I have an SFT1000e receiver

Yes, Tps channels are working very well now, thanks a lot.

But D+ channels freeze sometimes, can anyone confirm that please? And why it does that? :(

[egypte]

Still no Qmax update since 26 04 2007

[dzabcic]

Hi everybody, I have an SFT1000e receiver

Yes, Tps channels are working very well now, thanks a lot.

But D+ channels freeze sometimes, can anyone confirm that please? And why it does that? :(

Try In Key information (on exit button) , yellow light - na au on (Nagra auto update) should be off!!!

[sohail203_cad]

channel works but stops after sometime,please help i have SFT-3000(DIGITALLWORLD).

[popis_1]

Latest D+ : 07-06-2007

46 21 80 84 28 C6 67 FC
E9 04 E5 D4 A3 FF D8 C1

[popis_1]

Latest D+ : 09-06-2007

46 21 80 84 28 C6 67 FC
E9 04 E5 D4 A3 FF D8 C1

[jefelot]

Hi evryone,im a newby..i have sft501x n its working very well..i just learned how to update software few days ago and its cool.But when i tried to update the reciever of my freind stf190 plus after updating the reciever went dead..no power.
Hope to find an explanation what happend..Can this still be fix?
Thanx a lot n advance...

[popis_1]

Latest D+ : 11-06-2007

AF CD 76 13 36 B6 E8 01
66 3A 64 30 D4 25 36 34

[popis_1]

Latest D+ : 11-06-2007

7F 0A 33 E0 90 FD F8 AC
BE 5C 6A 00 6D D4 40 4B

[popis_1]

Latest D+ : 15-06-2007

F7 82 BF D2 97 7D 63 F8
DF BB B9 7D 96 75 00 C7

[sansmire]

Premiere channels are back on most of Digitalworld boxes.(patches dated the 15th June). laugh1

Enjoy them...and tell us how well the latest patch works...

[popis_1]

Latest D+ : 16-06-2007

83 18 72 95 31 15 20 1A
81 DC 90 F9 5A F4 36 08

[popis_1]

Latest D+ : 16-06-2007

BB 35 3E 41 06 6F 6A 0C
03 03 C2 4D CA 96 2C 66

[popis_1]

Latest D+ : 17-06-2007 :)

6C 4B 5F D2 AC 3B 09 7A
F9 17 37 E4 D4 D2 6E 0D

[chill]

Premiere channels are back on most of Digitalworld boxes.(patches dated the 15th June). laugh1

Enjoy them...and tell us how well the latest patch works...



Thanks a lot - runs with SW 6.89 on SCI-2100E
Chill

[popis_1]

Latest D+ : 19-06-2007 :)

94 73 A4 3A F9 A8 29 39
93 F0 9A FE C8 41 7A 42

[sansmire]

Thanks a lot - runs with SW 6.89 on SCI-2100E
Chill

You're welcome. laugh1

[dzabcic]

I hope that you all guys and girls having long hot summer!!!
Premiere is not working!!!:mad:
SFT-1010E

[dzabcic]

I am sorry that I wake you up!!!
False alarm!!!
Premiere is working!!!
Sorry

[planet_nl]

guys, I think some new firmware is uploaded in the usual sites.........

[sansmire]

Good news, laugh1

New patches are available for most of digitalworld which can open the Arabic channels "ART".

It's working very well, let us know how's it on your boxes...

[mama1]

Hey guys, can any1 tell me what channel we can view from D+ and is it in Hotbird 1-5.

Thanks

[jimihendrix]

Hey guys, can any1 tell me what channel we can view from D+ and is it in Hotbird 1-5.

Thanks
D+ is on Astra 1 19.2 east and Hispasat 30 west it covers approx 50 channels covering movies sports adult etc.
Taquilla 1-10, Taquilla x,xx,xx,xy. Fox, Cine+ and far more.

[chill]

Warning! Antivir detected virus on Softcam16.exe. It says W32/Virut.Gen found.

I contacted Digitall World but I have no reply yet.

Rgds
Chill

[sansmire]

Good news, laugh1

New patches are available for most of digitalworld which can open the Arabic channels "ART".

It's working very well, let us know how's it on your boxes...


You can open D+ on Astra 19.2, and it's a Spanish bouquet! :)

[dzabcic]

Hey guys, can any1 tell me what channel we can view from D+ and is it in Hotbird 1-5.

Thanks

http://www.parabolexperten.se/VPSList.htm#Hispasat%201C/1D%20at%2030.0°W Search Digital+ on Astra1 and Hyspasat

[dzabcic]

premiere has new key:
NN 0501 01 4955D86C8D4AD4F0432ABDE26B556090

New patch has virus, I wouldn't go for it. Previous version is ok and change key manually
_
SFT 1010 E

[JOELLE]

Salutations à tous ATTENTION softcamv16.exe est contaniner par un vers WIN32...... qui aurait le softcamv16.exe sans le virus et qui pourait me le fournir,SVP merci ¨d'avance..... joelle

[chill]

I also would join the list of pontential clients for a new softcam.exe without trojan. Until yesterday I could live without update but it looks as if pr*iere has gone.

Thanks a lot
Chill

[Diljaley]

any update/keys for showtime n art?? stopped last nite on SFT-5010.

thanks

Diljaley

[JOELLE]

salutations à tous , j'ai un problème avec un démo 2100e, plus de réception sur astra et certaines fréquences sur hotbirn par exemple 11526, pouvez-vous m'aider? merci joelle

[david_kskon]

Alguien tiene un firm que le funcione los canales Nick Esp y MTV ESP ??? Con el ultimo y los keys correctos no me van

Se agradeceria mucho



Bonjour a tous
J'ai un probleme avec un Digitallworld 4100E, avec le provaideur 4102 ( Bouquet C+ espagne Chaines Nick esp et MTV esp entre autres) Y a t'il un Firm qui puise le faire fonctionner ???

[abdouf]

good morning i have a problem with my SFT_2000E it remains to block at A 1.07 or on boot and when i tray the rebooter or the reflasher it does not answer there remain block for me it not accepts more the flash that I can make thank you for your assistance
http://www.sat-television.com/forum/images/smilies/confused.gif bonjour
j'ai 1 probleme avec mon SFT_2000E il reste bloqué sur A 1.07 ou sur boot et quand j'ai essayé de le rebooter ou le reflasher il ne repond pas il reste bloqué pour moi il accepte plus le flashage que je peux faire merci de votre aide

[chill]

Softcam16.exe tested again with antivir and this time no virus detected. Looks as if antivir had a temporary glitch. Could somebody else check this sw with another virus scanner?

Thanks
Chill

[sansmire]

Hi everybody,

New patches for Digitalworld boxes on

http://www.allstb2000.net/

:)

[dzabcic]

New patch (64 for DW 1010 E) tested with NOD32, no viruses found!!!
Could you tel me what is new in this patch in diference to ver. 62 or 63?
thanks
Damir

[sansmire]

New patch (64 for DW 1010 E) tested with NOD32, no viruses found!!!
Could you tel me what is new in this patch in diference to ver. 62 or 63?
thanks
Damir

Premiere! :)

[london1west]

Hi,
I have a digitalworld SFT 1000E, I updated it with the latest patch (24/08/07), but I don't have premiere channels....(they're out)

Can anyone send me the working keys please?

[london1west]

Hi,
I have a digitalworld SFT 1000E, I updated it with the latest patch (24/08/07), but I don't have premiere channels....(they're out)

Can anyone send me the working keys please?


No answer??? Nobody has premiere on digitalworld?

[london1west]

Hi,
I have a digitalworld SFT 1000E, I updated it with the latest patch (24/08/07), but I don't have premiere channels....(they're out)

Can anyone send me the working keys please?

Does anyone have premiere channels on his box?

[london1west]

Hi,
I have a d*gitalworld SFT 1000E, I updated it with the latest patch (24/08/07), but I don't have premiere channels....(they're out)

Can anyone send me the working keys please?



????????:confused:

[rudiroenhorst]

When you have latest firmware in it, then go to premiere 1, push exit, then yellow button nagra on. Then push exit and go for and back to premiere 1 and 2. Then premiere must be open.

Kind regards
rudi laugh1

[HackSat]

New key Digital OK

[HackSat]

D+ ok (1st change)

[london1west]

When you have latest firmware in it, then go to premiere 1, push exit, then yellow button nagra on. Then push exit and go for and back to premiere 1 and 2. Then premiere must be open.

Kind regards
rudi laugh1


Thanks Rudi, It's working very well! laugh1

[JOELLE]

salutations,les digitallworld 2100,2110,4100 sont compatible sans cam (avec carte canalsat canal +) au décryptage mediaguard pour canalsat et canal +france essayé le 19 09 07. joelle

[Kaptan57]

DigitallWorld Softcam
http://www.crosat.org/aploud/index.php?&direction=0&order=mod&directory=DIGITALL%20WORLD%20ZONE/SoftCam%20Key%20File

[Tarek77]

Can u tell me which codes work with digital world sft 2000

[shk2000]

could u please tel me for wihch model this file

[chill]

Hi SHK2000

Go to www.allstb2000.net and you'll find files for all Digitall World boxes. This is the manufactuerer's SW site for Europe. I alway download the the files from there.

Chill

[slavencic75]

Hello guys, I'm the new one here and let me someone help me, please, with one little explanation; 1. I have sft 1000e, upgraded boot loader on ver. 1.09 2. I found some softcam key released 8.10. and upgraded. That's my range, I followed the steps from sft1000.tk My question: how to change the channel list? (I found something in .bin form but I don't know how to get it into the receiver)

[dzabcic]

go to http://www.crosat.org/aploud/index.php

[chill]

Dear all

I was very enthusiastic when I read that the seca code for Digitall + NL was public, but put down when I learned that it worked only on certain cams. What would it need to have it open on Digitall World? I would be very grateful if one of you would take this hurdle.

Best regards
Chilll

[JOELLE]

bonsoir à tous ,qui pourrait me renseigner sur le loader possible sur un DCI-M21E car le 1.09 ne passe pas ??? merci d'avance joelle

[london1west]

Hi everybody!

Is the latest patch (14th december) still auto with the premiere channels or not?
Many thanks!

Digitalworld SFT 100e

[HackSat]

No.

[chill]

bonsoir à tous ,qui pourrait me renseigner sur le loader possible sur un DCI-M21E car le 1.09 ne passe pas ??? merci d'avance joelle


Salut

Tu as raison, le loader 1.09 n'est pas pour les boxes DCI. I'ai lu ça sur la site
http://www.allstb2000.net/

Là tu trouve aussi la firmware 6.20. Dan le zip il y a une software keydown1.20.exe. Peut-être c'est ça que tu cherches.

Bonne chance
Chill

[london1west]

I tried the lates patch (12 december) for Digitallworld SFT 1000e, it seems that there's a bug in a softcam key, as it''s impossible to update the box with that soft...

[chill]

Hi I've a different box (sci-2100e) and I have no problems. I was surprised to read that your patch is from 12 December. On the site i usually go there is a version 6.69 from 14 Dec. http://www.allstb2000.net/ Maybe you try the download from this site. Good luck Chill

[JOELLE]

merci chill,j'ai trouvé la solution pour les dci, ca marche avec le loader 1.03 ou 1.05 car j'ai deux dci en stock et il ont un loader différent et ca marche update t*ps ok. merci à toi . c'est de savoir qu'il y a des francophones avec digitall..... . joelle

[JOELLE]

AH J'oubliais BONNE ANNEE à tous

[fmampaso]

hello, im looking for the new firmware for my mirage 4100e, can somebody helpme?

Thank's, regards

[chill]

AH J'oubliais BONNE ANNEE à tous

Salut Joelle Mes conaissance de langue française sont assez limmitées. Je l''ai appris à l'eccole commerciale dans les années 70 - mais c'était une different chose. Bonne anné aussi a toi. Tu me trouve normalement dans les forum anglais et allemand. Chill

[chill]

hello, im looking for the new firmware for my mirage 4100e, can somebody helpme?

Thank's, regards

Hi fmampaso On the firmware site of digitall I found a line SFT-4000E Software 6.80 Could this be your box? The site is http://www.allstb2000.net/ Best regards Chill

[london1west]

Hi I've a different box (sci-2100e) and I have no problems. I was surprised to read that your patch is from 12 December. On the site i usually go there is a version 6.69 from 14 Dec. http://www.allstb2000.net/ Maybe you try the download from this site. Good luck Chill

yeah, the patch is signed on the 14th december on allstb2000.net, but when you open the file, it says 12th December, and I still not working,the box didn't accept it

[chill]

Hi London1West So it's just guessing. Do you have boot loader 1.09 on your box? Do you get a confirmation of successful downloads on your PC? When I once had problems with the software I did the following procedure. a) upload the channel settings from the box to the PC, using Set Editor 1.10. b) upload up-down.bin with DWSU.exe c) load softcam key with latest softcamtool in your ZIP d) reset software on the box e) download channel settings from PC to the box, using Set Editor 1.10. If all stays the same, it could be that the softcam keys are just outdated and you would need to update them from the forum, which can easily be done by remote control. Good luck Chill

[damjanworld]

I have the problem too with latest patch for Digitall World SFT1000E from 12.December 2007. Nagra2 au (autoupdate) for PW work but make mistake in two digit at second part of the key. It seems there is a bug in patch.

[youpy]

thank you ABUBAKER ... but I would ask you for my reicever model I have METABOX2 .. and I searched the new softwar of this model and I did not find it .. Can you help me ? please.

[youpy]

who Can help me for my METABOX2. I cannot find a new softwar please.

[london1west]

Hi London1West So it's just guessing. Do you have boot loader 1.09 on your box? Do you get a confirmation of successful downloads on your PC? When I once had problems with the software I did the following procedure. a) upload the channel settings from the box to the PC, using Set Editor 1.10. b) upload up-down.bin with DWSU.exe c) load softcam key with latest softcamtool in your ZIP d) reset software on the box e) download channel settings from PC to the box, using Set Editor 1.10. If all stays the same, it could be that the softcam keys are just outdated and you would need to update them from the forum, which can easily be done by remote control. Good luck Chill
Thanks man, all what I do now is to update premiere keys manually, it's safer and easier!

[london1west]

I have the problem too with latest patch for di*itall World SFT1000E from 12.December 2007. Nagra2 au (autoupdate) for PW work but make mistake in two di*it at second part of the key. It seems there is a bug in patch.

Didn't you have any problem to update your box with the softkey?

[chill]

I have the problem too with latest patch for di*itall World SFT1000E from 12.December 2007. Nagra2 au (autoupdate) for PW work but make mistake in two di*it at second part of the key. It seems there is a bug in patch.

When updating Premiere keys, you have to switch autoroll (yellow button) off. Otherwise the autoroll will change your code while entering. Once you get the corect code in, you can switch autoroll on again (for Csat). Grood luck Chill

[damjanworld]

Didn't you have any problem to update your box with the softkey?
No, with softcam and manual entering there is no problem, but software from 12.December 2007 can autoupdate premiere key on relevant channel from satellite and that work but with mistake on two digit.

[damjanworld]

When updating Premiere keys, you have to switch autoroll (yellow button) off. Otherwise the autoroll will change your code while entering. Once you get the corect code in, you can switch autoroll on again (for Csat). Grood luck Chill

Thank you for your answer but I did'nt mean that.With softcam and manual entering there is no problem, but software from 12.December 2007 can autoupdate premiere key on relevant channel from satellite and that work but with mistake on two di*it.

[damjanworld]

who Can help me for my METABOX2. I cannot find a new softwar please.

Hi, tray at crosat, here is the link, but you must be registrated for download:

http://www.crosat.org/aploud/index.php?PHPSESSID=2f4cf66d2c68a655361c753971219e 53&direction=0&order=mod&directory=OTHERS%20RECEIVERS%20516%20Models%20Rece ivers/Receivers%20Models%20M%20-%2041%20Models/METABOX

[london1west]

No, with softcam and manual entering there is no problem, but software from 12.December 2007 can autoupdate premiere key on relevant channel from satellite and that work but with mistake on two di*it.

what do you mean by "Manual entering"?

[chill]

Hi London1West On our boxes (at least on my digitall world sci-2100, we can change the codes by remote control. Just sit on a locked channel and click on the exit button (white). A menue will open where you can select the ID. With the correct ID you click ok and start entering the codes. For nagra you have to change two lines. Please make sure that you have autoroll (yellow button) off for updating premiere. Afterwards you can switch it on again. Everything unclear? Rgds Chill

[damjanworld]

Yes, I now that, the same software is in my box too. There is no problem enter key with remote control unit and softcam keys with SoftCamToolV16.exe- everything work.But autoupdate via satellite Astra1 on F:12032H S/R 27500 such MGM channel and other Ch_ (Direct portal Ch...-wrong MECM) work false(two digit are wrong updated).I afraid we must wait for next software version to fix this bug. Yes,nagra Au off solve wrong autoupdate but than is autoupdate OFF.
Whit regards to chill and london1west!
damjanworld

[london1west]

Hi guys,
Yeah I update my box by entering the 16 digital keys manually, the think is I couldn't updateit with the latest softcam..that what I'm asking for! Anyway, let's wait the next one...

[damjanworld]

Thray this softcam for digitall world receivers all models, with SoftCamToolV16.exe, all keys updated:

[london1west]

Did anyone try the new patch dated the 10th of January? Are premiere channels working properly this time?

[london1west]

Did anyone try the new patch dated the 10th of January? Are premiere channels working properly this time?




Nobody has tried it yet...

[HackSat]

Yes work premiere au,Polsat au and digi tv

[dzabcic]

Premiere au, polsat au, di** au not tested yet, ok

[chill]

Dear all I can confirm that the autoroll functions with prem* and pols* perfectly work on my SCI-2100E. Rgds Chill

[dzabcic]

Auto upadate for Prem**re works prerfectly.
Dig*tv and Pols*t not. If somebody knows why?
Thanks
Damir

[chill]

Hi, I noticed the same with Polsat. Even Premiere took extremely long but eventually came. Best regards Chill

[JOELLE]

salutation à tous,tipis ca ne marche plus ni avec dita¨¨wo¨d ni h¨max!! joelle

[xtrabil]

TPS down since yesterday, anyone knows a new update?

[chill]

Dear all I'm sorry - I haven't found any so far - will let you know as soon as it is out. Furthermore I noticed that autoroll does something on Polsat but not 100% correct. The first hexadec code pair in the second line comes wrong, the rest would be ok. Rgds Chill

[xtrabil]

thanks chill, i will wait for a new update.

[franky&benny]

Hi, I noticed the same with Pol*sat. Even Pre*miere took extremely long but eventually came. Best regards Chill

Will this also work on Phoenix apllo ci+mc

[ac mun]

thnks

[resident59]

Merci beaucoup à quand la mise à jour pour sft-2000e?

[resident59]

Quel clone pour le démo digitallworld sft-2000e parceque ce démo marche nickel, dommage que le site de mise à jour s'arrete avant le sft 2000.
Mais tres bon boulot à tous

[S_men]

Hello!
Can somebody explain me how can I update my receiver Digital world 4100 !
I mean how is the way to do this!
I have a cable to connected to the computer and have downloaded the last softcam key!
Thank u

[alen.s]

new soft out..tps au again..

[london1west]

yes new patch available (05 Febrauary 2008) on
http://www.allstb2000.net/

[chill]

Hello!
Can somebody explain me how can I update my receiver di*ital world 4100 !
I mean how is the way to do this!
I have a cable to connected to the computer and have downloaded the last softcam key!
Thank u

Hi S_men
This is the procedure for my SCI-2100E and I assume it is the same for your box.
Connect the cross-over serial cable from your PC to your sat box. Run DWSU.exe: First select the corect com port, then the file app_down.bin. Switch you sat box off and on again. When the sw update is over you can load the softcam file, using softcamtool16.exe. Also here you have to select the correct serial port and the file softcam key. Switch off and on on your remote the the new softcam is loaded.
If you have an other application on your pc, locking your serial port, you have to close it first. Example: Hotsynch for Lotus Notes. Should you not have a serial port on your PC but an USB, you need a USB-serial adapter toghether with the windows driver. In this case you may need to fiddle arround to find the right port, on my laptop it is com4.
Hope this helps
Chill

[JOELLE]

Avec 6.97 c'est ok pour t°p°s les keys n'ont pas changés!!!! http://www.allstb2000.net/

[JOELLE]

6,96 pour 4100 et ok t°p°s

[damjanworld]

for polsat AU go to F:11593 S/R:27000 V (program such TVN) and wait for while-press exit button few times
Bok imenjače! Kod mene radi na taj način.

[chill]

New SW out on www.allstb2000.net. It says Polsat autoroll.

Chill

[london1west]

I tried to update my sft 1000E with the patch dated 4 /02/08, the patch app_down is updated successfully, but the sofcam didn't it says "check your sw" what is the SW please? Can anyone help me?

[london1west]

I tried to update my sft 1000E with the patch dated 4 /02/08, the patch app_down is updated successfully, but the sofcam didn't it says "check your sw" what is the SW please? Can anyone help me?

Please, can anyone tell me what's the "SW"

[irankk]

any chance for MCT in digital world

[ruunungood]

can you help me tps en multivion di*ital world sci5100 plz

[mama1]

Please, can anyone tell me what's the "SW"


SW short for SoftWare

[london1west]

I tried to update my sft 1000E with the patch dated 4 /02/08, the patch app_down is updated successfully, but the sofcam didn't it says "check your sw" what is the SW please? Can anyone help me?


No idea?

[knutselsmurf13]

No idea?

You must use the latest Softcamtool V16.0laugh1

[london1west]

You must use the latest Softcamtool V16.0laugh1

Can u send it to me please?
many thanks!

[chill]

Hi London1West

When downloading the software file from www.allstb2000.net you get a zip file, including the SoftcamTool V1.6

Anyway, here you are

Good luck
Chill

[london1west]

Hi London1West

When downloading the software file from www.allstb2000.net (http://www.allstb2000.net) you get a zip file, including the SoftcamTool V1.6

Anyway, here you are

Good luck
Chill
Thanku very much, will try it Thursday and will see!Many thanks!

[ruunungood]

can you help me tps en multivion di*ital world sci5100 plz
http://world-sat.info/cobalt/buttons/report.gif (http://world-sat.info/report.php?p=312027) http://world-sat.info/cobalt/buttons/edit.gif (http://world-sat.info/editpost.php?do=editpost&p=312027)

[london1west]

Anyway,tps channels r back,they are working with the patch 12 dec 07 on my sft 1000e.

[ruunungood]

where i can get sw london 1west

[london1west]

where i can get sw london 1west

here it is man.

[ruunungood]

thank you men london 1west

[damjanworld]

Actual Digitall World SW have WRONG MECM FOR PREMIERE DIRECT PORTAL AGAIN. We can only hope a new SW come soon and make this channal hell. An other receiver is ok, only on DAW wrong again!

[S_men]

Hi Chill!!!
I have tray your instruction, but by me its doesn't work I don't know why?
When I choice the port under write port Com1 Initialization success!
So after I choice the file app down.bin, powered my reciever with the remote control on and off, but nothing happen!:( So I have cable rs - 232 ! Its this the right cable or which one I need!
If you know, please tell me!
Thanks
Hi S_men
This is the procedure for my SCI-2100E and I assume it is the same for your box.
Connect the cross-over serial cable from your PC to your sat box. Run DWSU.exe: First select the corect com port, then the file app_down.bin. Switch you sat box off and on again. When the sw update is over you can load the softcam file, using softcamtool16.exe. Also here you have to select the correct serial port and the file softcam key. Switch off and on on your remote the the new softcam is loaded.
If you have an other application on your pc, locking your serial port, you have to close it first. Example: Hotsynch for Lotus Notes. Should you not have a serial port on your PC but an USB, you need a USB-serial adapter toghether with the windows driver. In this case you may need to fiddle arround to find the right port, on my laptop it is com4.
Hope this helps
Chill

[knutselsmurf13]

Hi Chill!!!
I have tray your instruction, but by me its doesn't work I don't know why?
When I choice the port under write port Com1 Initialization success!
So after I choice the file app down.bin, powered my reciever with the remote control on and off, but nothing happen!:( So I have cable rs - 232 ! Its this the right cable or which one I need!
If you know, please tell me!
Thanks


You write: Receiver on and of.
Reverse it , Receiver must be off , then turn on!!!laugh1

Greets Knutsel

[kengyro]

Does this work for a NEX YE-2000 CX Super Plus receiver?

[chill]

Hi kenygyro

I don't know your box. It is not on the list of digitall world sat receivers on www.allstb2000.net. If it is one, I assume it works the same way.

Best regards
Chill

[magsud_m2000]

:confused::confused:hello
i have a reciver [di*ital all world sft-3000m --1m flash--hw3.00--sw1.97]
can i change sw or hw this reciver?
i have [sw changer.exe]
please help me.:confused::confused:

[WIN 1,9]

Hallo to everyone!
Does anyone know what is going on whit AB motors on 11 681 H- HOTBIRD?
Thank you.

[chill]

according to www.allstb2000.com (http://www.allstb2000.com) this is the lastest sw for your box.
Best regards
Chill

[chill]

Hallo to everyone!
Does anyone know what is going on whit AB motors on 11 681 H- HOTBIRD?
Thank you.

Just tested. It works. Do you have the lastest sw on your box?
Best regards
Chill

[chill]

Dear all

I have just downloaded and tested the new software from www.allstb2000.net. The new version can deal with P*lsat autoroll. This means no more manual update of softcam keys.
Enjoy it!
Chill

[WIN 1,9]

Thank*s Chill!
It work*s now.

[ruunungood]

help plz d*italworld sci 5100 Pre*miere DIRECT PORTAL en tbs.thank*s

[london1west]

new patches on http://www.allstb2000.net/ :)

[RayBen]

Hi all,
Are there any new softcam for SFT-4000M?

TPS is down today June 09th.

Thanks in advance and king regards,

[ezzmaso]

And what about SFT-2000M??????????? Many thankssssssss.

[nsknathan]

please send me digital world 501x new soft ware.

[WIN 1,9]

Hallo everyone!
Does anybody know what is whit Multivision 11662; V-HOTBIRD?

[nordiste]

Hallo everyone!
Does anybody know what is whit Multivision 11662; V-HOTBIRD?
multivision it's closed since 2 june

[chill]

Dear all

When I tested Polsat CAM 7101 I noticed that autoroll didn't work correctly any more. Today the 4th last and the 3rd last code were wrong. So I had to switch off autoroll and correct manually.

I hope that there will be soon an update.

Best regards
Chill

[damjanworld]

It's seems that we need wait for new software patch while old is out of date.

[WIN 1,9]

multivision it's closed since 2 june
I know it"s closed, it said so on the program menu.Will it be open-when and where?

[bluetooth72]

daw Softcam Open Sex On Tv / Freexdelight Hotbird 13e

[RayBen]

Hi all,
I tryed the Update from allstb2000.com for my Digitall World SFT400M (24.Jun.2008) but it doesn't work is it normal? anyone has an other solution?

Thanks in advance,

[bluetooth72]

open Sex On Tv Gold & Diamond Hotbird 13e

[larama]

Hi.i need help for a recever from tecnomate 1000. i want see the tv globo ,in hotbird. can you help me

[damjanworld]

This site is fake. Try with this page:
http://www.allstb2000.net
I hope that this help You.
Reggards!

[tamer137]

open Sex On Tv Gold & Diamond Hotbird 13e 28-6-2008

B 044C:378B:088F:0CE7:BC38DACE90748185F84B4C8FC79DCA 2E ; SEX ON TV DIAMOND
B 044C:3787:0B5D:0B5E:8DA288B78158B089635BE3A1DB943E AD ; SEX ON TV GOLD

[chill]

Dear all, The so often quoted web-site has new software version on, with the remark "Polsat updated". Could be that autoroll will do again. Have a try Chill

[tamer137]

DIGITALLWORLD..MIRAGE.SOFTCAM by tamer137..11.7..zip (http://www.sat-television.com/showfile.php?id=144276)
PW 00,PW STAR 00 ,POLSAT 00,DIGI TV 01,TPS(down),RAI(august), ORF,MEDIATECH(next) ,MULTICANAL 01,TV GLOBO 00, GLOBECAST,BISS..OK

[chill]

Dear all

On www.allstb2000.net (http://www.allstb2000.net) there is a new SW version dated 13 July 2008. I have updated my box but Polsat autoroll does not work. Anyway have a try and please report.
Chill

[tamer137]

Polsat 00 ,art Active And Next Key,sex On Tv..ok All In Read Me File

[tamer137]

Art..ok,sex On Tv Gold And Diamond..hotbird..11411 H..dcw..ok

[abassikamel67]

thanksssssssssssssssssssssssssssssssssss

[damjanworld]

What is with TPS on DAW boxes? There is no software for it more then 3 months. Daily update is not poseble too, like on other receivers! Before tps has work very good on digitall world receivers. Have enyone some information about this?

[abcdefh]

thanks Tamer pr***ere opens again:-)

[svea]

PW 00,PW STAR 00 ,POLSAT 00,DIGI TV 00,TPS(down),RAI(september ),ORF,MEDIATECH(next) ,MULTICANAL 01,TV GLOBO 00, GLOBECAST,BISS..OK


MTV TRAX,(11895 V)..FIVE T2(12304 H)...ASTRA 28.2 E..DCW..OK
12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
TT 4........................................(12480 27500). 28.2E..DCW..OK
ART,SHOWTIME....OK
FREEXTV(INXTC)...HOTBIRD...DCW...OK
laugh1

[svea]

PW 00,PW STAR 00 ,POLSAT 01,DIGI TV 00,TPS(down),RAI(september ),ORF,MEDIATECH(next) ,MULTICANAL 01,TV GLOBO 00, GLOBECAST,BISS..OK


MTV TRAX,(11895 V)..FIVE T2(12304 H)...ASTRA 28.2 E..DCW..OK
12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
TT 4........................................(12480 27500). 28.2E..DCW..OK
ART,SHOWTIME....OK
FREEXTV(INXTC)...HOTBIRD...DCW...OK

[svea]

PW 00,PW STAR 00 ,POLSAT 01,DIGI TV 00,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


MTV TRAX,(11895 V)..FIVE T2(12304 H)...ASTRA 28.2 E..DCW..OK
12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
TT 4........................................(12480 27500). 28.2E..DCW..OK
FREEXTV(INXTC)...HOTBIRD...DCW...OK

[svea]

PW 00,PW STAR 00 ,POLSAT 00,DIGI TV 00,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


MTV TRAX,(11895 V)..FIVE T2(12304 H)...ASTRA 28.2 E..DCW..OK
12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
TT 4........................................(12480 27500). 28.2E..DCW..OK
SHOWTIME....OK
FREEXTV(INXTC)...HOTBIRD...DCW...OK

[svea]

PW 00,PW STAR 00 ,Pol*sat 01,DIGI TV 00,TPS(down),RAI(september ),ORF,MEDIATECH(next) ,MULTICANAL 01,TV GLOBO 00, GLOBECAST,BISS..OK


MTV TRAX,(11895 V)..FIVE T2(12304 H)...ASTRA 28.2 E..DCW..OK
12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
TT 4........................................(12480 27500). 28.2E..DCW..OK
ART,...OK
FREEXTV(INXTC)...HOTBIRD...DCW...OK

[svea]

PW 00,PW STAR 00 ,POLSAT 01,DIGI TV 00,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


MTV TRAX,(11895 V)..FIVE T2(12304 H)...ASTRA 28.2 E..DCW..OK
12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
TT 4........................................(12480 27500). 28.2E..DCW..OK
ART....OK
FREEXTV(INXTC)...HOTBIRD...DCW...OK
SEX ON TV GOLD AND DIAMOND..HOTBIRD..DCW..OK

[ruunungood]

sex gold en sextv asrtra or hotbird help freq....plz

[svea]

PW 00,PW STAR 00 ,POLSAT 00,DIGI TV 00,TPS(down),RAI,ORF,MEDI ATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


MTV TRAX,(11895 V)..FIVE T2(12304 H)...ASTRA 28.2 E..DCW..OK
12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
TT 4........................ ................(12480 27500). 28.2E..DCW..OK
ART....DOWN
FREEXTV(INXTC)...HOTBIRD. ..DCW...OK
SEX ON TV GOLD AND DIAMOND..HOTBIRD.11411 H.DCW..OK

[henrique m]

ce pour quand les tpss sur digitall?
merci

[svea]

PW 00,PW STAR 00 ,POLSAT 00,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


MTV TRAX,(11895 V)..FIVE T2(12304 H)...ASTRA 28.2 E..DCW..OK
12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
TT 4........................................(12480 27500). 28.2E..DCW..OK
ART....DOWN
FREEXTV(INXTC)...HOTBIRD...DCW...OK
SEX ON TV GOLD AND DIAMOND..HOTBIRD..DCW..OK

[guddu]

old keys dear.. inxtc, gold, diamond are down.

[svea]

PW 00,PW STAR 00 ,POLSAT 01,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
TT 4........................................(12480 27500). 28.2E..DCW..OK
ART....DOWN


PAY ATENTION ON TIME, WHEN SOFTCAM WAS UPLOADED.IN THAT MOMENTS..ALL KEYS ARE OK!!!!!!!!!!

[svea]

PW 00,PW STAR 00 ,POLSAT 01,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
TT 4........................................(12480 27500). 28.2E..DCW..OK
ART....DOWN
TPS..10911 V HOTBIRD...DCW..OK(EXCEPT LCI,EUROSPORT)


PAY ATENTION ON TIME, WHEN SOFTCAM WAS UPLOADED.IN THAT MOMENTS..ALL KEYS ARE OK!!!!!!!!!!

[ruunungood]

Help How Can I Uploaded My Resoir Digitallworld Sci 5100 Dit Software Plz.....

[svea]

PW 00,PW STAR 00 ,Pol*sat 00,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
TT 4........................................(12480 27500). 28.2E..DCW..OK
ART....DOWN
TPS..10911 V HOTBIRD...DCW..OK..NEW DCW!!!!

PAY ATENTION ON TIME, WHEN SOFTCAM WAS UPLOADED.IN THAT MOMENTS..ALL KEYS ARE OK!!!!!!!!!!

[chill]

Help How Can I Uploaded My Resoir Digitallworld Sci 5100 Dit Software Plz.....


Hi ruunungood

On www.allstb2000.net you find the following software for you
a) Software Version 5.87
b) Boot Ver 1.09
c) Set Editor 1.10

Before doing anything, please check on your sat box the boot Version and the software version. If you have an older boot version than 1.10 you have to upload this first.

This is the procedure
In the ZIP Files you'll find a program DWSU.exe This is the program for uploading. Connect your Sat-Receiver with a cross-over serial cable with the seriel port of your PC. If you do not have one you have to buy a Serial - USB adapter together with the driver. Install the driver, connect the adapter with the cross-over cable of and an USB port. Start DWSU.exe. Select the COM port. On my PC it does not work with COM1 but with COM4. You have to try. Make also sure that you do not run a program which hooks on the serial port, such as Lotus Notes HOTSYNCH. Next select the file, switch the receiver off and on again. The upload should start. Please give enough time for updating.

Once you have done this, you can do the same with the program Version. In the 6.87 ZIP File the is an app_down.bin. Upload this to your sat receiver the same way as described above.

Next you can start the SoftcamToolV16.exe. Also here you have to set your COM port first. Next you can upload either the softcam.key in the ZIP file or use the newer one in this forum.

The SetEditor1.10 can be used to store you program list on your PC.

I recommend resetting the Sat-Receiver after loading a new version. After this you have to upload the your program list again.

Have a try. Good luck
Chill

[svea]

PW 00,PW STAR 00 ,POLSAT 01,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
TT 4........................................(12480 27500). 28.2E..DCW..OK
ART SPORT 5..HOTBIRD..12015 H..DCW..OK
ART....DOWN

[ruunungood]

thank you chill 1000/1000

[svea]

PW 00,PW STAR 00 ,Pol*sat 00,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
FREEX DELIGHT(INXTC)...HOTBIRD..DCW..OK

[svea]

PW 00,PW STAR 00 ,POLSAT 00,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
FREEX DELIGHT(INXTC)...HOTBIRD..DCW..OK
TVP INFO,LINGUA,RELIGIJA..HOTBIRD..11488..DCW..OK

[svea]

PW 00,PW STAR 00 ,POLSAT 01,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
FREEX DELIGHT(INXTC)...HOTBIRD..DCW..OK

RAI AFRICA...BISS..DOWN

[svea]

PW 00,PW STAR 00 ,POLSAT 00,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
FREEX DELIGHT(INXTC)...HOTBIRD..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK

[svea]

PW 00,PW STAR 00 ,POLSAT 00,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
ZEE ,ZEE TVCINEMA,PUNJABI..HOTBIRD 12476 H..DCW..OK

[tamer137]

i want to config all sex on tv
B 044C:3787:0B5D:0B5E:C9AC5CD1DB823D9ABD8ADC23C11A8F 6A ; SEX ON TV GOLD
B 044C:378B:088F:0CE7:B335C1A9CD85B90B07E2806944F5A6 DF ; SEX ON TV DIAMOND
B 044C:378C:0CF1:0CF2:C7C667F4C1C1E062263F3297C19445 9A ; SEX ON TV CRYSTAL
B 044C:378C:0CF1:0CF2:C7C667F4C1C1E062263F3297C19445 9A ; SEX ON TV Silver
B 044C:378C:0CF1:0CF2:C7C667F4C1C1E062263F3297C19445 9A ; SEX ON TV Classic

[svea]

PW 00 ,POLSAT 00,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
MTV TRAX,(11895 V).....ASTRA 28.2 E..DCW..OK


to tamer 137.......
those keys are expired 2 hours after.Keys are added in softcam and next time when they will be in DCW mode,only type new keys on screen

[svea]

PW 00 ,POLSAT 00,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
MTV TRAX,(11895 V).....ASTRA 28.2 E..DCW..OK
MOTORS TV...HOTBIRD..11137 H..DCW..OK

[sft-5010]

i need new software for my receiver digitallworld sft-5010
and thanks alot

[daliboralfa]

kfgkgf

[chill]

i need new software for my receiver digitallworld sft-5010
and thanks alot

Hi SFT-5010

You'll find the software on www.allstb2000.com. I see there a version number 6.58 from 15. July 2008. The softcam.key my be outdated but you can use the latest one on this thread.

Rgds
Chill

[svea]

PW 00 ,POLSAT 00,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
MTV TRAX,(11895 V).....ASTRA 28.2 E..DCW..OK
SEX ON TV GOLD AND DIAMOND AND CRYSTAL,SILVER..HOTBIRD..DCW.OK

[tamer137]

My Receiver Is DigitallWorld SFT-190M The Channel Zone Europa Take Biss Key Not NAGRA Key i try to put Nagra Key to this chanel nothing hapend

[guddu]

Tamer, man go to dreambox forum. We are in DIGITALL world

[tamer137]

B 044c:378c:0cf1:0cf2:0ab9783bc1904b9cd08154a5d0cec9 67 ;sex On Tv Crystal
B 044c:378d:0ce5:0ce6:9f062dd2f3600f62f41bedfc3f50a6 35 ;sex On Tv Silver
B 044c:378f:0cf6:0cf7:c1a82b9491c3e93d63e97bc72bacdb b2 ; Sex On Tv Classic

[svea]

PW 00 ,POLSAT 00,DIGI TV 01,TPS(down),RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
MTV TRAX,(11895 V).....ASTRA 28.2 E..DCW..OK
RTVI....HOTBIRD...DCW...OK
MOTORS TV.........HOTBIRD ..DCW..OK


for tamer...keys was in softcam ,and still are,but no work anymore on dcw:rolleyes:

[svea]

Pol*sat 00,DIGI TV 01,RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
MTV TRAX,(11895 V).....ASTRA 28.2 E..DCW..OK
RTVI....HOTBIRD...DCW...OK
SEX VIEW PACKAGE...HOTBIRD..DCW..down

[svea]

POLSAT 00,DIGI TV 01,RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
MTV TRAX,(11895 V).....ASTRA 28.2 E..DCW..OK
MAX TV..EUTELSAT 16 E...11513 V..29950...DCW..OK

[mathreg]

merci beaucoup pour ce grand travail que tu fais.
bonne continuation

[guddu]

svea. is Zee/Cinema keys are still active or down please?

[svea]

@guddu.......
Zee cinema and other channels from India are down.When new DCW will be released..be sure softcam be here
all DCW channels with DCW keys are green on list.When they not on list,it mean..no more DCW keys.

[guddu]

thanks for quick reply dear.

[sft-5010]

i want to buy card for my feceiver. iam in egypt

[guddu]

go to market and get cards as per your choice buddy.

[guddu]

Svea dear, the following active keys For GEO network Pakistan on AsiaSat. I tired to copy in the softcam but its not working even tried through remote. CAN YOU HELP ME please, i have SFT-5010M.

thanks

GEO NETWORK
ASİASAT 3S 105.5 E
4180 V 26666 ident : 1FFF 19-08-2008

BISS KEY : 1234569C789ABCCE

Geo network (105.5E)
CAID: 0x2600 SID: 0x0003 PROVIDER 0x01FFF
Index HEX Key: 12 34 56 9C 78 9A BC CE

CCcam & Newcam Constant CW :
D 2600:000000:025B:0280:1FFF::12 34 56 9C 78 9A BC CE 12 34 56 9C 78 9A BC CE #GEO TV ASİASAT 3S 105.5 EAST
SoftCam.*** (mgcamd) :
F 00031FFF 00 1234569C789ABCCE ;Geo network (105.5E)
F 00031FFF 01 1234569C789ABCCE ;Geo network (105.5E)

For Keylist.txt (evocamd) :
B 0003 00 1234569C789ABCCE1234569C789ABCCE ;Geo network (105.5E)

Camd3 Version :
2600:000003:0000000000:00:1234569C789ABCCE1234569C 789ABCCE ;Geo network (105.5E)

SS2
BOUCHAOUI TDA3=1234569C789ABCCE1234569C789ABCCE

Gbox Softcam Biss Cfg :
#0: { 26 00 00 03 { 12 34 56 9C 78 9A BC CE 12 34 56 9C 78 9A BC CE}}

FOR HUMAX5400

1054 03EB 123456789ABC Geo ME
1054 02EA 123456789ABC Geo news 1

[svea]

Digitallworld have specific way to open biss and dcw keys.
I need from you to open this channel,push exit and then you will see tabel.
On left side you have some numbers.Please retype me first and last row.
But.....I go on trip ,andnext 2 weeks I will not be on net.

[svea]

POLSAT 00,DIGI TV 01,RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
MTV TRAX,(11895 V).....ASTRA 28.2 E..DCW..OK

ADD BISS KEYS TV KYIV..10722..27500.H..AMOS 4W
ADD BISS KEYS QTV.......10758...30000.H..AMOS 4W

[guddu]

i have tried manually but not working. anyhow have a nice trip man.

[tamer137]

thank's man

[behy1]

Hi
I bought a Metabox sth-700-HD. I add key to keyeditor1.09 then i copy the softcam.key file to my USB. I put usb into th receiver and by using specific option on receiver data copy to receiverr and system accept this file, then (auto restart, boot,...so on).
But non of the channel on Hotbird or Astra2 was open. spee1

Did i do the right procudre for unlock the channel or no?:rolleyes:

Copy the softam.key file is enough for unlock or also need some card or cam or...?:confused:

with lots of Thanks

[svea]

If you used this softcam,you made wrong.You must use softcam for PC DVB cards(for ss2).procedure is OK,but softcam is wrong.
This is softcam for digitallworld,mirage and qmax receicers only,and few others.

[behy1]

hi sevea
thank you , which software is correct for my procedure (without using cam).

with best wishes

[svea]

hi sevea
thank you , which software is correct for my procedure (without using cam).

with best wishes
if you have patch in metabox(emulator) then try this.........:p

[behy1]

HI SVEA

Thank you very much. I will try.

with best wishes

[behy1]

Hi svea

could you please tell me with this key.file, which channels would be open on hotbird (13E) and astra2(28.2 E).
with best wishes

[svea]

PW00,POLSAT 00,DIGI TV 01,RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
MTV TRAX,(11895 V).....ASTRA 28.2 E..DCW..OK

ADD BISS KEYS TV KYIV..10722..27500.H..AMOS 4W
ADD BISS KEYS QTV.......10758...30000.H..AMOS 4W
SEX VIEW CHANNELS..HOTBIRD..DCW..OK
SEX ON GOLD,DIAMOND,CRYSTAL,...DCW...OK

[svea]

PW00,POLSAT 00,DIGI TV 01,RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
MTV TRAX,(11895 V).....ASTRA 28.2 E..DCW..OK

ADD BISS KEYS TV KYIV..10722..27500.H..AMOS 4W
ADD BISS KEYS QTV.......10758...30000.H..AMOS 4W
RTVI.............HOTBIRD...DCW....OK

[svea]

PW00,Pol*sat 00,DIGI TV 01,RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
MTV TRAX,(11895 V).....ASTRA 28.2 E..DCW..OK

ADD BISS KEYS TV KYIV..10722..27500.H..AMOS 4W
ADD BISS KEYS QTV.......10758...30000.H..AMOS 4W
RTVI.............HOTBIRD...DCW....OK
SEX VIEW CHANNELS....HOTBIRD...DCW...DOWN

[svea]

PW00,Pol*sat 00,DIGI TV 01,RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
MTV TRAX,(11895 V).....ASTRA 28.2 E..DCW..OK
SEX ON GOLD,DIAMOND,CRYSTAL,SILVER..HOTBIRD..DCW..DOWN

[البرنس الهلالي]

hi !
I cannot speak english good.


please svea give me softcam for ART on nilesat .

or

would you mind giving me softcam for ART on nilesat.




thank you .

[tamer137]

hi !
I cannot speak english good.


please svea give me softcam for ART on nilesat .

or

would you mind giving me softcam for ART on nilesat.




thank you .

ART on nilesa down


ART & PHELA
(7.0°W)
I 0604 08 F3D4CF964686EE2DE205253A09C8F433 OFF
I 0604 06 B2EE3A87E5A27490E260BA8E4E7AB324 OFF
ShowTime
(7°W)
I 0604 06 D7B9303BB095994FC86CE9C3309DB529 OFF
I 0604 02 99D427392E0F5B92BFD5FD4276578307 Active
IS present old 02 key for showtime (work for disney 11859-62 v 27500 3/4 and bloomberg freq 11978 V 5/6 nilesat 7W...at the moment ok)

[البرنس الهلالي]

thank you

tamer137 (http://world-sat.info/member.php?u=79887)



you are verey good ! :D

[samy n]

Dear Svea
I would like to thank you for your great effort for updating the Qmax soft came that fast,
and I have a question , Why thees channels close few hours after updating ?
Thanks again and have nice time. laugh1laugh1laugh1

[arto2000]

Hi, I'm new on this forum, and I'm not an english speaker...

First I'd like to say thank you to the svea for his/her job.

I have a question:
How do I use these codes? Can I write them in my sat receiver?

[chill]

Hi, I'm new on this forum, and I'm not an english speaker...

First I'd like to say thank you to the svea for his/her job.

I have a question:
How do I use these codes? Can I write them in my sat receiver?

Hi Arto

There are two ways.
a) The hard way
You select a channel that promises to be opened by a softcam code.
Click the exit button and you come to a cam menue. Click on the green button until you see the cam ID and the PPID (program provider ID) that fits. Next click on ok and enter the first bar of codes. After save you click on the second one and do the same. Hard, but without software and cable.

b) The convenient way
Download the ZIP file and find inside a tool called SoftcamTool V16.
Connect your PC with a cross-over cable to the receiver. If your PC has no serial outlet, use a USB-serial adapter. Start the software, select the serial port, select the file to upload (softcam.key)switch you receiver off and on again.

If you need further support on method b), please check in this thread, I once posted a detailed instruction.

Good luck
Chill

[arto2000]

ok thanx

[البرنس الهلالي]

why you stoped download softcam ?

[tamer137]

POLSAT 00,DIGI TV 00,RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
MTV TRAX,(11895 V).....ASTRA 28.2 E..DCW..OK
RTVI...HOTBIRD...DCW...OK ..NEW KEYS!!!

[tamer137]

POLSAT 00,DIGI TV 00,RAI,ORF,MEDIATECH(next) ,MULTICANAL 00,TV GLOBO 00, GLOBECAST,BISS..OK


12005" Big Brother Red Button (12480V 27500) @ 28.2E ..DCW..OK
ADD ANIMAL PLANET,DISCOVERY ON ARABIC ..BISS KEYS..EUROBIRD 2 ..25,5E..11585 V...OK
RAI AFRICA...BISS..OK
MTV TRAX,(11895 V).....ASTRA 28.2 E..DCW..OK
ZEE TV,ZEE CINEMA ..HOTBIRD..DCW..OK

[ahoy]

Hi all,
I wanna know if its possible to load these keys via usb?(I have Technomate 5400 Ci +Usb). When I extract them and write into a flasf drive, my receiver doesn't see anything in the folder. Or maybe they fit only for some of the receivers?

[hshakeem]

Hello friends,
I am posting for the 1st time, although I have been updating my receiver SCI-190M from www.allstb200.com, for the past 2 years.

I have a questions, if any one can guide me?
Polsat Channels open with CAS ID: 0X1810 & PPID: 0X00007101. But on some channels like HBO, BBC, Fox Life I cannot seem to get 'CAS ID: 1801' and instead get '1803' and a random PPID which is different every time. What can I do?

Regards to every one.

[mizobibi]

this problem happens with me too i have: QMAX_WithCardReader_V6.125_14_07_2008 I have a questions, if any one can guide me? Pol*sat Channels open with CAS ID: 0X1810 & PPID: 0X00007101. But on some channels like HBO, BBC, Fox Life I cannot seem to get 'CAS ID: 1801' and instead get '1803' and a random PPID which is different every time. What can I do? Regards to every one.

[mizobibi]

thanks svea and tamer137 for upload softcam we are waiting for more

[svea]

I had long buisness trip.Many questions,so let is start answer.
Channels which have notice CCW(DCW)are clear few hours or days .They will be OK if in softcam is parametres which are must be input.That are numbers infront DCW keys.
example:
B 1FA4:39D7:003A:003B:5E7B9C7534C0C8BCC2F49D539AE167 E2 ;RTVI ME
If that numbers are not in softcam,you can not manually insert new DCW keys.
Problem is because,digitallworld softcam have free place for only 100 BISS and DCW keys.If is in softcam 120 keys...last 20 is not readed and in memory.
Each channel have own numbers and it will work if parametres are corectly.
It is very hard job to be fast and again and again move some keys to input others channels on dcw,because of limitate with memory in softcam.
So,I will update DCW keys on your request or for programs which are interesting and if they work at least few hours on DCW keys.
It is useless make DCW keys for channels which usually work one hour on DCW keys.
regards for all members
P.S.
thanx for tamer 137 which is here when I am busy.nice job my friend