Comag_neu_SL35C.zip

[abubakr89]

http://world-sat.info/showthread.php?p=234413&posted=1#post234413 (http://world-sat.info/showthread.php?p=234413&posted=1#post234413)

[r2d233]

i buy i camag sl 35

und made some flashed.
---------------------------
First try

http://world-sat.info/showthread.php?t=46130

The stb dont start, no picture.
------------------------------
Second try

the original fte max 100s firmware.

The same,
The stb dont start, no picture.

---------------------------------
Third try
http://world-sat.info/showthread.php?p=234413&posted=1#post234413

The stb start get 2 second a sw backgrond picture, but not more, no background, no menu.

-----------------------------------

Has anyone the complete original comag sl 35 firmware?

On comag-ag.de is not the firmware!

[scruffy]

@r2d233 you should find it here.
Check the Version of your chipset first.
http://comagforum.zapto.org/forum/index.php

@abubakr89 I have a Comag SL65/12 with the
ALi M3329 B1 - in the the software above the
readme says
first release for 3329C , only for SL35

So I have a double whammy - not a SL35 and not
a ALi 3329 C chipset. I tried flashing it with the latest
moresat stuff and got a real fright !!!!
I've sent you a PM on the subject.

As a general rule anyone with a Comag 65 dont flash
with the Moresat stuff - at least it gave me one hell of
a fright and I thought I killed a two day old box !!!!!

If some braver person knows better then please tell me how.

[r2d233]

in my comag sl 35 is a ALI M3329 B1.

On the way, with the first pc with that i flashed the sl 35 says severel errors.

But with an other pc (and a cold SL 36) the flashig says it was ok.

But no picture.

[r2d233]

i found following post:

If you have a Model of the above and the Manufacture Date is LATER/AFTER as 1.06.2006 you CAN patch it..!
Turn the STB over and on the bottom is the Manufacture Date printed
Just search for these File's and off you go.

1... "SL6502022007"
2..."SL65+SL35-6PINB1PrAllEmu-Tested 26.03.2007"

Works perfectly.
The BEST way to check if your SL35 is the right one is to Open it and gently remove the Silver Pad covering the ALI Chip.
If the Chip has this written on it its OK to Patch.

ALI
M3329 B1
0626 TG05
X607304000GB

After Patching go into the Menu and enter 2580 this TURNS ON the EMU and a message appears with CAS Enabled.. if this happens your on your way..
Enter 2580 again and you TURN OFF the EMU on Board and a message appears CAS Disabled.
---------------------------------------------------------------------------

i found "SL6502022007" and my sl 35 works.
The menu looks different, und i think its only fta avaible, because the file is to old. I dont test a scambled channel at the moment.

But better an normal stb as a "out of order" stb

by the way my IC shows
ALI M 3329 B1
0644 TG07
X608942000GB

[scruffy]

Thanks for the clear and precise information.
GOOD POST
I don't have a Comag 35 S - what I have is a
SL 65/12 with the same chipset as you have.

[r2d233]

I try more images but the most dont work, even one with so name original sl35.

On my STB dont work the button on the front, i dont know, if this an error from the beginning, a damage from the flashing not suitable images, or that the images in the moment dont 100% suittable for my stb.

The images shows a choice between rgb, s-video, YPbPr my stb has only composite outgoing.

At the moment the flashing about rs232 dont work. But I think that comes not from last succesful flashing.

I had problems with the above posted images. The diseqc und transpondersearch dont work proper.

My actual images is an other, diseqc und transpondersearch work.

Premi*** dont work
Autosearch from TPS dont work.

ORF und D+ work

I dont posted the actual images cause it was the last, after that the rs232 flashing, if the stb swtch on, dont work.

But it is a quaint thing, i use actual images successful, flash the "original", the stb dont work, i flash again the actual images, the stb work, i try to flash an other images the rs232 flashing dont work?

HMM something strange, or a counter for the rs232 input?