KSC-570H 13.41.6D EMU 187Plus

[Thomas3]

Hi!

Here a firm for the KSC-570H, emu 187Plus, but T*S AU ok.

Regards,
Thomas3

[kent1]

Thanks Thomas, the au update works. will try encryptions later. thanks again.

[Relax08]

Thank You Thomas.!!

[Clownfish]

Thanks Thomas laugh1

Does this open Premeire ?? Just hoping :)

[Thomas3]

Hi!

Not for Premiere World.
But for Premiere Star looks it very well at present. The test channels (Service 2 - 10) scrambled without MECM$60 again (black test patterns) and Premiere Star Promo (Service 1) is open.
Please note, that key 01 is active now!

Regards,
Thomas3

[tommath]

thanks a lot thomas

[Thomas3]

Hi!

New in the Premiere Star package: Sat1 and Kabel1 as test channels (Service 4 and Service 5) - ok for Kaon.

Regards,
Thomas3

[conte vlad]

Hi,
i am out to several months, but with this firmware, what i can see?
Thanks a lot
Conte vlad

[Clownfish]

Nagra2 providers except Premiere World and TPS

[Thomas3]

Hi!

New on Astra:

-NASN: 12.663 H 22.000 5/6
-Sat.1 Comedy / Kabel1 Classics: 12.545 H 22.000 5/6
-Cartoon Network: 12.441 V 27.500 3/4
-RTL Living: 12.187 H 27.500 3/4
-RTL Crime: 12.070 H 27.500 3/4
-MTV Music: 11.973 V 27500 3/4
-Kinowelt / TCM / AXN / Animax / Disney Playhouse / Disney Toon / Boomerang / Premiere Star Promo: 11.875 H 27.500 3/4
-entavio Start: 11.436 V 22.000 5/6

Open with firms universales or with emu ***Plus.

Regards,
Thomas3

[kent1]

Hi!

New on Astra:

-NASN: 12.663 H 22.000 5/6
-Sat.1 Comedy / Kabel1 Classics: 12.545 H 22.000 5/6
-Cartoon Network: 12.441 V 27.500 3/4
-RTL Living: 12.187 H 27.500 3/4
-RTL Crime: 12.070 H 27.500 3/4
-MTV Music: 11.973 V 27500 3/4
-Kinowelt / TCM / AXN / Animax / Disney Playhouse / Disney Toon / Boomerang / Premiere Star Promo: 11.875 H 27.500 3/4
-entavio Start: 11.436 V 22.000 5/6

Open with firms universales or with emu ***Plus.

Regards,
Thomas3


Thanks again Thomas, But do know why CNN on hotbird 12596 can not be cleared.? or the Eurosport group even if polsat keys are inserted? for other stbs they are cleared but not our dear ksc- 570 H.

[Thomas3]

Hi!

That's the price for the Irdeto2 emu:
Irdeto comes before Viaccess now and Mezzo/CNN has both a Irdeto2 provider...
The Eurosport channels encrypted in Seca2, prov. 65.
Into the Kaon firm no Seca2 Nanos are implemented.
With the Diablo Eurosport is also openly only, so long the old Nanos to be used...

Regards,
Thomas3

[kent1]

Hi!

That's the price for the Irdeto2 emu:
Irdeto comes before Viaccess now and Mezzo/CNN has both a Irdeto2 provider...
The Eurosport channels encrypted in Seca2, prov. 65.
Into the Kaon firm no Seca2 Nanos are implemented.
With the Diablo Eurosport is also openly only, so long the old Nanos to be used...

Regards,
Thomas3

Thanks for the explaination. One other problem I face with my stb is that the kke updates does not update my emu keys. It loads(I see the progress and stb restarts after 100%) ok but when I check the emu nothing is changed.

[Thomas3]

Hi!

Yes, it's clear. You must take the last KKE exe, version 1.5.
Replace it with the old exe file in your KKE+ directory.

http://world-sat.info/showthread.php?t=26940&page=3

Regards,
Thomas3

[kent1]

Hi!

Yes, it's clear. You must take the last KKE exe, version 1.5.
Replace it with the old exe file in your KKE+ directory.

http://world-sat.info/showthread.php?t=26940&page=3

Regards,
Thomas3

Phew !!!!! That was some eye opener, you pointed out to me, I guess I have only been looking for firmware not the others,I didn;t even know about kup 3.1xp. I really don't know how much to thank you. thanks a lot

[alextairieur]

Hi,
NASN (prmiere star) is not opened with this emu. WHY??

but we have le k*ys FCW

A+

[Thomas3]

Hi!

NASN on 12.663MHz, H, 22.000Ks/s is open.

Regards,
Thomas3

[ozkan2081]

hi... thomas

help me I want software

KSC-570
S/W:V0B.00.01
H/W:V12.01.A1
LOADER:V.6.1.8 C.A:2.2.3

there tps auto sofrware you give now thank you

[grantec]

KAON PVR Emu TPS AU OK!

Hw13.41.6D

Installation :


* 1. Flash/Write the corresponding emu to your receiver. (Ex: HW13.41.6D).
* 2. Set your Time Zone to (GMT+0:00) (In the Configuration Menu).
* 3. Select the Following Frequency (10873V 27500) Ushua!a on Hotb!rd.
* 4. Wait couple of minutes untill you have a clear image.
* 5. When this Channel becomes clear , verifiy the other TP$ Channels ...

Note:
This Process is only for 1 day (24h) !
Everyday performe the same process after 5:30 Pm becasue the update takes place at that time So you can continue enjoying your favorite channels


* 6. Thus after 1 day follow the same process (from 3 to 5)

Trick for GMT settings :
IF your GMT does not set to GMT 0.00 (exemple : stays on GMT 0.13)
Make a total reset of your receiver (load default).
and all will be back to GMT 0.00

[will9342]

KAON PVR Emu TPS AU OK!

Hw13.41.6D

Installation :


* 1. Flash/Write the corresponding emu to your receiver. (Ex: HW13.41.6D).
* 2. Set your Time Zone to (GMT+0:00) (In the Configuration Menu).
* 3. Select the Following Frequency (10873V 27500) Ushua!a on Hotb!rd.
* 4. Wait couple of minutes untill you have a clear image.
* 5. When this Channel becomes clear , verifiy the other TP$ Channels ...

Note:
This Process is only for 1 day (24h) !
Everyday performe the same process after 5:30 Pm becasue the update takes place at that time So you can continue enjoying your favorite channels


* 6. Thus after 1 day follow the same process (from 3 to 5)

Trick for GMT settings :
IF your GMT does not set to GMT 0.00 (exemple : stays on GMT 0.13)
Make a total reset of your receiver (load default).
and all will be back to GMT 0.00

Hi Thomas3,grantec

I flashed my 570H with this firmware and it's working fine with my official csat card and astoncrypt cam. Just a small question.
Will this firmware allow other encrypted channels (not from csat) to be watched? I only have access to astra 19.2 (I live in an apartment ans have no access to the sat. dish/lnb,..).

I have read that some keys have to be pressed on the remote to access certain menus (hidden?), is this done with the demondulateur on or off?
Sorry for these basic questions but as i'm a novice then your help is appreciated laugh1

Thanks
will

[Clownfish]

Press Yellow,Blue,Geen then Menu to reveal the hidden key menu.
You can open the Digital+ Package with regular key updating via the key menu.
Here's a list of channels in the D+ package - http://www.lyngsat.com/packages/dpastra.html

[will9342]

@clownfish

Thanks again, you are indeed a great help. Found the menu and the keys for D+
Works great. I suppose that this means I have to enter the keys every day. No problem.

Again, thanks laugh1

Regards
Will

[Clownfish]

@clownfish

Thanks again, you are indeed a great help. Found the menu and the keys for D+
Works great. I suppose that this means I have to enter the keys every day. No problem.

Again, thanks laugh1

Regards
Will

Glad you're up and running :)
Just in case you don't know a lot of the D+ channels broadcast in both Spanish and English.

[maghni]

شكرا

[will9342]

Yes, I had a wonderful surprise, after language selection, to find spanish and english. The wife's not happy though (no french) :D

Now to try and find some others, premier?

[Clownfish]

Premiere Star is open on Kaon but a majority of the package sadly isn't.
If you want all of Premiere then you'll have to buy another cam module.

[ganzic]

Hi!

Here a firm for the KSC-570H, emu 187Plus, but T*S AU ok.

Regards,
Thomas3

I am trying to update KSC-570H with pvr
20.05.17-D1B5
h/w: 13.41.6d
s/w: 13.05.04
Loader: 5.1.9v3
C.A.: 2.2.4
PVR: 1.9.0

But this update doesnt work, it says wrong model, please help?

[macmanolo]

I am trying to update KSC-570H with pvr
20.05.17-D1B5
h/w: 13.41.6d
s/w: 13.05.04
Loader: 5.1.9v3
C.A.: 2.2.4
PVR: 1.9.0

But this update doesnt work, it says wrong model, please help?

Use the Engineer mode.

[nima 2]

hi
is there new tps auto frim for ksc 570H
13.41.6d ?

thankx

[alextairieur]

hi
is there new tps auto frim for ksc 570H
13.41.6d ?

thankx
NO, please wait

A+

[txwdvb]

ksf 570 z: 16.00
pech..??

[rubenfar]

Hi what is the best cam for the 570H?
should i update the firmware? what cable I have to use through the RS-232?

[drogba-555]

hi the best team
esque 8300sat2=570h